Iridium heavy oil multi-stage and four-stage combined colloid mill, grinding pump is a mechanical high-speed shear pulverization grinding principle, which will mix a certain proportion of heavy oil, water, emulsifier and other liquids into the working chamber. High-viscosity, heavy friction, strong friction, particle shredding and other complex and powerful mechanical movements and diversified high-frequency shear grinding to break the molecular chain of heavy oil droplets, break water particles, etc. The high-frequency friction, violent vibration and turbulent flow of the oil after the high-speed friction of the thousands of blades subjected to the uneven grinding process cause the droplets of the liquid droplets to break, thereby reducing the viscosity of the heavy oil and making the emulsifier more effective to exert hydrophilic action. The fine emulsifier and the fine water particles are uniformly distributed in the heavy oil to form a water-in-oil emulsion. Water-in-oil colloid mill|Quad colloid mill|Combined colloid mill|Heavy oil colloid mill will heavy oil colloid mill working chamber emulsified water-in-water catalyzed evenly sprayed into the furnace through the mist, once the oil droplets on the heavy oil surface Being burned, the tiny water droplets in the oil are heated and vaporized, and the volume is rapidly expanded to instantly explode the oil droplets (secondary atomization). In the secondary atomization, due to the micro-explosion effect generated by the oil droplets, the micro-oil blast is caused again. Disperse into a finer misty oil droplet at a time. At this time, the oil droplet has a large specific surface area and is fully combusted after contact with oxygen in the air, which effectively increases the flame brightness and shortens the burning time, so that the heavy oil is completely burned and the thermal effect is eliminated. The discharge of black smoke has reached the goal of saving fuel.
main feature
1. It has strong mixing and homogenization, dispersing microemulsion ability and stronger pulverizing grinding and crushing conveying function.
2. Therefore, the parts are made of forged and finished, and there are no castings.
3. The motor adopts high-quality motors such as ordinary type and explosion-proof type to ensure long-term use without quality problems.
4. The device is silent design, no vibration, no noise, good dynamic balance effect, easy to install
technical background:
1. The protection aspect system with filter and multi-directional displacement compensation device makes the performance of the grinding pump more stable and safer to operate.
2. High-speed pipeline type colloid mill, the seal of the assembly contact surface of the grinding pump adopts O-type static seal, especially the improvement of the parts connecting the sealing surface of the discharge port makes the mechanical seal of the machine bear the pressure and the sealing strength.
3, colloid mill, grinding pump to the stator using high-quality materials SUS304, SUS316L, TCrMo, etc., to achieve localization of product materials, improve the product life of the main part of the stainless steel material; stator and rotor and material contact parts are made of special stainless steel and various alloys Steel hard alloy material is made by special process, which can be treated by nitriding or tungsten carbide to enhance the hardness of the surface. Its hardness can reach about BHP hardness of HB600, which is resistant to corrosion, abrasion and corrosion. ,High precision.
Comet colloid mill, heavy oil and coal tar four-stage combined colloid mill, grinding pump
Technical Parameters
Model Grinding disc adjustable distance mm processing capacity
M3/h motor power kw speed r/min inlet and outlet size mm type
JM-W180ZA 0.01-2 2-6 7.5 2950 80/40 Horizontal
JM-W180ZB 0.01-2 2-8 15 2950 80/40
JM-W200ZA 0.01-3 2-10 22 2950 100/50
JM-W200ZB 0.01-3 2-12 30 2950 100/50
JM-W250ZA 0.01-3 5-20 30 2950 125/65
JM-W250ZB 0.01-3 5-25 37 2950 125/65
JM-W320ZA 0.01-4 10-30 45 2950 125/80
JM-W400ZA 0.01-2 10-40 55 2950 150/80
JM-W500ZA 0.01-2 20-60 75 2950 150/100
Note: The flow range in the table is water as the parameter. When the treatment volume is large, please add the matching pump delivery at the outlet.
2 The pressure of the pump port is ≤0.2MPa. It is recommended to install a length of hose or metal bellows to prevent deformation of the head.
3 The motor in the table is an ordinary motor, and the explosion-proof motor is optional.
4 According to the viscosity, the motor power can be adjusted as appropriate.
5 Do not allow hard materials to enter the working chamber, if necessary, add filters at the inlet.
6 can be formulated with insulation cooling jacket.
