Titanium dioxide and silica is the best white industrial intermediates and adhesives:Titanium dioxide and silica modified main process: First, from the start of titanium ore, hoist, Raymond machine or mill, warehouse tanks, pumps and other wear-resistant; acid hydrolysis, the slag metering tank, sulfuric acid metering tank, acid hydrolysis and acid hydrolysis pot pot equipment; crude titanium liquid productions, sedimentation tanks, filter (currently there are some manufacturers use sophisticated filtering equipment); separation of vacuum crystallization equipment, disc filtration device (currently collected to improve rate, some manufacturers use a centrifuge to collect the residual titanium ferrous sulfate); sophisticated filters, filter; enrichment process, the vacuum film concentrator; after that seed preparation and hydrolysis aspects of equipment, basically, large and small various reaction tank, the specific requirements depending on the hydrolysis process; cooling, currently more water cooler; after entering the water, two wash, salt processing and crushing, calcination, the specific equipment used is the frame filter, salt treatment pot, brick; finished, the hoist, Raymond machine (or a rolling mill, ball mill, jet mill, colloid wear pump, heterogeneous machines, etc.), titanium dioxide Grinder (titanium black colloid)

Titanium dioxide and silica is the best industry white pigment and adhesives are widely used in paints, plastics, rubber, paper, ceramics, cosmetics and textile industries. Wherein the rutile titanium dioxide anatase type titanium dioxide having a relatively higher weather resistance, but rutile type titanium dioxide remains photoactive surface defects, in order to improve the quality of the finished titanium dioxide, coated surface must be treated, prior to envelope request TiO2 particles having good dispersibility, dispersion must be beaten, increase their dispersibility. Beating dispersion step as a prelude to the work surface treated titanium dioxide and silica modified position is important.

Titanium dioxide colloid (Titanium black colloid) The same applies to the white carbon black production process:
  Water quenched by water quenching water filtration water filter to remove mechanical impurities, and the filtrate into the water quenching water storage tank. Then pumped to the water glass tank and reactor configuration.
  Sodium silicate liquid water glass workshop director sent into the water glass tank configuration, adding an appropriate amount of water of sodium silicate solution and process water quenched steel. After an additional precipitate was removed by filtration through a filter press, from the sodium silicate waterglass intermediate pumped to the metering tank, metered, and then pumped into the reactor water glass delivery.
Concentrated sulfuric acid tankers shipped, concentrated sulfuric acid into the receiving slot, the next solution is pumped to sulfuric acid storage tank, into the reactor with sulfuric acid metering pumps. Concentrated sulfuric acid was added and precipitation of water glass reactor, by direct steam heating, after the reaction, the reactor end concentration PH value 3 to 7, into the slurry intermediate tank and slurry pump into the heat exchanger with heat exchange. To reduce the temperature of the slurry. Heat backward filter slurry is filtered and washed with water, liquor drain. Slurry recovery tank filter materials for recycling and drying process venturi scrubber thick paste. Wear-resistant pump (feed pump) foldback filter again recovered by filtration. Cake sent by conveyor belt after beating tank dioxide colloid (Titanium black colloid) beating. After beating the completion of the materials transported to the concentrated slurry tank pump, the pump thick dried send drying tower, after dry Product delivery product silos.
 Colloid (Titanium black colloid) Optional: tank, drain valve, inverter, electric control box, move the car
 Colloid surface treatment: polished, abrasion treatment
 Import and export links: flange, screw, clamp
 Colloid matching containers: This equipment is suitable for containers of various sizes
 Colloid flow * Output - line speed - power - inlet / outlet connections - gap type * flow depends on the setting and the characteristics of the material processed, while the flow can be adjusted to the maximum allowable amount of 10%.
 Table 1 refers to the upper limit of the amount of processing medium "water" measurement data.
 Second processing amount depends upon the viscosity of the material, the consistency and the final product requirements.
 3 such as high temperature, high pressure, flammable, corrosive and other conditions, you must provide accurate parameters for selection and customization.Introduction and use of titanium dioxide colloid mill......